
9145E NID Software User’s Manual Class of Service Configuration
Queue Configuration
94
10.2.3.3 AF/EF Mode
Type the number of the AF code, a series of codes such as 11-13 if desired, E for Expedited Forwarding
CoSQ, or
D for Default CoSQ, and press Enter. The cursor moves to the CoSQ setting in the next column,
or the first number/value of the series (for example: 3 if 3 - 7) is highlighted. Use the
Space Bar to scroll
through the available queues. Select a queue and press
Enter. If a series of codes was chosen, all of
those CoSQs will be changed. Once all CoSQs are set, press
Esc to return to the Classifier Mapping
screen.
Figure 10-5 Untagged Packet Classifier Mapping Screen - AFEF Mode
10.3 Queue Configuration
From the Class of Service Configuration screen, type either 3 or 8 and press Enter. The Queue
Configuration screen (Figure 10-7) opens.
The Ingress and Egress Configuration screens are organized so that the queue parameter settings are
listed from the highest priority queue on the top of the screen to the lowest priority queue at the bottom of
the screen.
From this screen the user can optimize the queues to insure better performance of the service. As an
example, all service frames that are time sensitive, such as VOIP, will go through a Strict Priority Queue
and the buffer would not allow to store few packets. An order example will be for internet traffic is not time
sensitive and therefore will go through a low priority queue but will a high queue size to allow to buffer
packets.
Canoga Perkins Corp. Ethernet Network Interface Device 04-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02:59:35
--------------INGRESS UNTAGGED PACKET CLASSIFIER MAPPING--------------
AFEF Mode
Class 1 Class 2 Class 3 Class 4
DSCS CoSQ DSCS CoSQ DSCS CoSQ DSCS CoSQ
---- ---- ---- ---- ---- ---- ---- ----
Low Drop Precedence AF11 Q3 AF21 LLQ AF31 Q3 AF41 LLQ
Med Drop Precedence AF12 Q2 AF22 Q3 AF32 Q2 AF42 Q3
High Drop Precedence AF13 Q1 AF23 Q2 AF33 Q1 AF43 Q2
Expedited Forwarding CoSQ: Q1
Default C oSQ: LLQ
Select AF Code or a Range x-y [11-43], [E]F, [D]efault:
:------------------------------------Messages------------------------------------
Komentarze do niniejszej Instrukcji