Canoga-perkins 9175 Command Reference Instrukcja Użytkownika Pobierz pdf (Strona 638)

100

101

37-1

37 IEEE 802.1x Commands

37.1 dot1x initialize

Use the dot1x initialize privileged EXEC command on the switch to manually return the specified IEEE

802.1x-enabled port to an unauthorized state before initiating a new authentication session on the port.

Command Syntax

dot1x initialize interface interface-name

interface-name Specify the interface name to be initialized.

Command Mode

Privileged EXEC

Usage

Use this command to initialize the IEEE 802.1x state machines and to set up a fresh environment for

authentication. After you enter this command, the port status becomes unauthorized.

Examples

The following is sample output from the dot1x initialize command:

Switch# dot1x initialize interface eth-0-1

Related Commands

show dot1x

37.2 dot1x max-reauth-req

Use the dot1x max-reauth-req interface configuration command on the switch to set the maximum

number of times that the switch restarts the authentication process before a port changes to the

unauthorized state. Use the no form of this command to return to the default setting.

Command Syntax

dot1x max-reauth-req count

no dot1x max-reauth-req

count Number of times that the switch restarts the authentication process before the port

changes to the unauthorized state. The range is 0 to 10.

Default

The default is 2 times.

Command Mode

Interface configuration

CanogaOS Command Reference

1 2 ... 633 634 635 636 637 638 639 640 641 642 643 ... 789 790

Komentarze do niniejszej Instrukcji

Brak uwag

Canoga-perkins 9175 Command Reference Instrukcja Użytkownika Strona 638

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Canoga-perkins 9175 Command Reference