Canoga-perkins CanogaOS Configuration Guide Instrukcja Użytkownika Strona 272

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 350
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 271
CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 272 of 350
drop-precedence-0‘s max-threshold is 35, drop-precedence 1 is 45, drop-precedence 2 is 55. If
buffered packets exceeds min-threshold, the subsequent packet will be dropped randomly with
rate of (drop-probability /256)
DUT(config)# interface eth-0-1
DUT(config-if)# queue 1 random-detect
DUT(config-if)# queue 1 random-detect min-threshold 20 30 40
DUT(config-if)# queue 1 random-detect max-threshold 35 45 55
Schedule
Packets are scheduled by SP between classes and WRR between queues in a class.
The following shows mapping queue to different class and configuring bandwidth. Follow these
steps from Privileged Exec mode.
1. configure terminal.
2. interface IFNAME to specify the interface to match to the policy map.
IFNAME = name of interface
3. queue <0-7> class <0-3> to map queue to specified class.
4. queue-bandwidth to set egress queues’ bandwidth.
The following example shows configuring schedule parameters for egress queues. In this
example, queue 5 6 7 belongs to class 3, which is highest priority. The bandwidth is
1:1:1:1:1:2:3:4.
DUT(config)# interface eth-0-1
DUT(config-if)# queue 5 class 3
DUT(config-if)# queue-bandwidth 1 1 1 1 1 2 3 4
Configure port policing
All traffic received or transmitted in the physical interface can be limited rate, and all the exceeding traffic
will be dropped.
The following shows creating a port-policer to limit bandwidth. Follow these steps from Privileged Exec
mode.
1. configure terminal.
2. interface IFNAME to specify the interface to match to the policy map.
IFNAME = name of interface
3. port-policer ingress|egress color-blind|color-aware cir <1-1000000> cbs
<0-4000000> ebs <0-4000000>| pir <1-1000000> pbs <0-4000000> drop-color red|yellow
(use-l3-length) to specify a port policer.
Note: The no port-polcier ingress|egress command deletes a port policer.
Przeglądanie stron 271
1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 349 350

Komentarze do niniejszej Instrukcji

Brak uwag