Canoga-perkins 9140 Four-Port SNMP Managed Fast Ethernet Switch Instrukcja Użytkownika Pobierz pdf (Strona 55)

EdgeAccess SNMP Managed Fast Ethernet Switch

Model 9135/9140

5-9

After you have selected the desired field to change, the current selection will become highlighted. Press the

<Tab> key to scroll through available options.

The following options are available for each of the possible configurable options shown on figure 5-11:

•

Interface: select either "direct" or "modem"

•

Init Modem at Startup: select "yes" or "no"

•

Modem Init String: the default Init String is ats0=1 (Advanced users only)

•

Password enable: select "yes" or "no"

•

SLIP Password: select a password of up to 15 characters

• SLIP IP Address: enter the IP address of the Serial Line Interface Port. The SLIP address and the in-

band address must have different network IDs and cannot reside on the same network.

•

SLIP Subnet Mask: enter the SLIP Subnet Mask

•

SLIP Port Setup: select number 8, <Enter> and a new menu will be displayed that details the

configuration of the SLIP Port. Enter the values shown in Figure 5-12.

Figure 5-12. SLIP Port Setup.

5.2.1.4 Passwords

The 9135 Two-Port Switch and the 9140 Four-Port Switch has three levels of password protection:

•

Supervisor highest level, can do anything

• Manager middle level, has some write access

• User mostly read-only access, can reset some counters

When entering a new password, you may select up to 18 characters. All letters, numbers and characters are

legal and your new password will be case sensitive. Reference Figure 5-13.

Formatted

Formatted: Bullets and Numbering

Deleted:

Deleted: Page of 871

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 98 99

Brak uwag

Canoga-perkins 9140 Four-Port SNMP Managed Fast Ethernet Switch Instrukcja Użytkownika Strona 55